About the IC3600KRSS1
The IC3600KRSS1 is a GE FANUC Relay Board designed for the Mark I and Mark II series. Created for gas/steam turbine management, the MKI and the MKII were the first of General Electric’s Speedtronic line. Scalable and adaptable, both systems have seen decades of use around the world in temperatures ranging from -50C to +50C. They have been used in offshore applications, for pipeline pumping stations in remote locations, for large 400 Mw (combined cycle) power stations, for utility peaking turbines, and for compressor drives in chemical and industrial processes.
The IC3600KRSS1 is an uncluttered board with few components. There are six relays, placed down the center line of the board. These are marked K1 through K6. Next to these are six diodes. These are marked CR1 through CR6. The board also has a line of right-angled metal pins attached to one edge. These pins are designed to function as a communications device and are wired into the rest of the Speedtronic system in order to facilitate communication between the board and the system.
The IC3600KRSS1 is factory drilled in two corners. It carries the GE logo and its individual board ID number. Numbers 1, 5, 10, 15, 20, 25, 30, 35, 40, 45 and 51 are placed on one edge of the board. It is also marked with the codes 006/01 and 68A944139G1. “ADS” is marked in one corner.
The IC3600KRSS1 will be shipped by our team protected by a static-reducing covering. A review of manufacturer-provided publications like manuals is recommended before installation of your new part begins. Tech support for the IC3600KRSS1 was provided by GE.
Your older Speedtronic system may not have OEM support, but AX Control will be here to keep it running. Contact our team today to learn more about our service and exchange programs.
