About the IC3600KRSU1
The IC3600KRSU1 is a GE FANUC component for either the Mark I or the Mark II series. Created for the management of steam or gas turbines, the Mark I and Mark II were the first Speedtronic systems to be commercially released by General Electric. In both of these systems, the turbine control panel also serves as the human/machine interface with the turbine. Several arrangements for the location of the turbine panel are available to meet the needs of different size and types of turbine units. The turbine control panel contains the computational electronics, and machine-mounted sensors, devices, and actuators to provide input and output functions.
The IC3600KRSU1 is built with four relays, which are marked K1 through K4. It has four wire wound resistors, each marked 2148012 3K 5% 10W. The board uses metal film resistors, too. There are four jumper switches on the surface of the board. A capacitor is placed in line with each relay. These are aluminum electrolytic capacitors. The board uses many diodes, which are all marked. There are also three light emitting diodes placed along one edge of the board. These are covered by a housing.
Opposite the housing mentioned above, the board has thirty-two metal pins placed in a line on one edge. These pins function as a communications device. The board is numbered by fives from one to fifty-one on this edge.
The IC3600KRSU1 will be shipped in a protective sleeve. AX Control recommends reviewing any OEM publications available to you, such as manuals and datasheets, for safety procedures and other pertinent information before beginning installation of your new part.
