Product Description
The IC3600KRSV1B1B is a Relay Board. This is a GE FANUC part. The IC3600KRSV1B1B is a component for the Mark I or the Mark II series, which are both Speedtronic gas and steam turbine management systems. In these systems, primary control of the gas turbine is accomplished by controlling fuel flow to the combustion system. Sometimes this is supplemented by varying-cycle air-flow by changes in the position of variable inlet guide vanes or in compressor speed. Fuel flow, in turn, is controlled in response to the startup control, the speed control system, or the temperature control system--whichever of the three requires the least fuel.
The IC3600KRSV1B1B is built with several informational markings. These include the board identification number, the GE logo (which appears near one corner,) the codes 006/02 and 002/01, the number 273A1842, and the code “MAC.”
The IC3600KRSV1B1B has three LEDs placed on its surface. These light emitting diodes are all red in color. They are placed in a parallel line and are covered by a gray housing. There are three relays on the board. Each includes a relay diagram. Three large wire-wound resistors take up one corner. Each resistor is marked 2148209 3k 5% 10W. The IC3600KRSV1B1B also uses metal film resistors, through-hole diodes, and several capacitors.
The IC3600KRSV1B1B communicates with the larger Speedtronic system using wiring that connects into twenty-eight right-angled pins. These pins are all individual components but function together as a backplane. The board is numbered below these pins.
Our team will carefully pack the IC3600KRSV1B1B and protect it with a static-reducing sleeve. We suggest the review of any OEM publications like manuals and datasheets before you begin the installation of your new part.
