About the IC3600LRDH1B1D
The Relay Driver card marked IC3600LRDH1B1D is a GE FANUC component for the Mark I or Mark II series. GE’s first Speedtronic electric control systems, the Mark I and Mark II were specifically designed for scalability and adaptability and can be used to manage full power stations up to 400 Mw combined cycle rating down to single unit systems of 4000 hp. Both the MKI and the MKII are designed with redundancies on control functions like speed and temperature control. The MKI and MKII have been used around the globe in all kinds of environments, in temperatures ranging from -50 degrees Celsius to +50 degrees Celsius.
The IC3600LRDH1B1D is marked with the GE USA trademark symbol. It has the board’s ID number displayed on one edge and is also numbered on one edge. The board carries the code “STAR,” along with the codes 68A999536, 006/06, 003/04 and 002/03.
The IC3600LRDH1B1D is fitted with fifty-one individual metal pins. These pins connect into wiring and function as a sort of backplane to let communication occur between the Speedtronic system and the board.
The IC3600LRDH1B1D has eighteen transistors fitted to its surface. It is important to note many of these components are marked as a single component. In other words, several components may all be marked as “Q1,” for example. The board uses fixed vacuum capacitors. Resistors are primarily metal film. Diodes on the board typically are not marked by a prefix.
Technical support for the IC3600LRDH1B1D was provided by General Electric. Important end-user publications like manuals and data-sheets were part of GE’s technical support.
