About the IC3600QOXC2
The IC3600QOXC2 is a printed circuit board or PCB which was made to be a part of the Mark I-II series by General Electric (GE). The Mark systems were designed for the control of both gas and steam turbines. The MKI and MKII (Mark I and Mark II) were the first two systems in the Mark series to be created. The Mark series are responsible for the control all of the important turbine functions. Functions like startup and shutdown, cooldown, and fuel and water injection. The IC3600QOXC2 PCB is called a speed control sensor card.
Two large inductors, or coils, are featured on the IC3600QOXC2. These inductors are coils of wire which are covered by black plastic. There is one (1) black transformer located near the center of the IC3600QOXC2. This transformer is large and rectangular. It features the component’s part number which is 68A9930S2 GI. There are also many capacitors positioned on the IC3600QOXC2. Many of these capacitors are solid yellow, but some others are solid red. The IC3600QOXC2 also contains a variety of resistors. Bands in colors like white, red, orange and others cover many of the resistors. The rest of these resistors are solid black with no bands. The IC3600QOXC2 features at least two (2) MOVs or metal oxide varistors situated close to the board’s upper edge. A variety of small transistors can be seen on the IC3600QOXC2. Some of the transistors are round and silver and the others are black and are shaped like a half circle.
