About the IC3600SBMB
The IC3600SBMB is a printed circuit board or PCB manufactured by General Electric (GE). This part was created to a be a part of the Speedtronic Mark II (MKII) system. Mark II is a system in the Mark series made for gas turbine control. Mark II was the second system in the Mark series after Mark I (MKI).
The IC3600SBMB features a variety of electronic circuit board components. Four (4) LEDs, or light-emitting diodes, are featured on the side of the IC3600SBMB. These LEDs light up red when they are functioning. These LEDs are labeled with the initials CR. On the opposite side of the IC3600SBMB, there are five (5) blue potentiometers, which are also known as variable resistors. The dials on these parts can be used to adjust the resistance of the device. Four (4) medium-sized black capacitors are located in a line near the center of the IC3600SBMB. Each capacitor contains 12 volts (12V). There are also four (4) medium-sized yellow capacitors featured on the IC3600SBMB. Many medium-sized light blue resistors can be found all over the IC3600SBMB. These resistors feature multi-colored bands. These bands indicate the resistance capability of each component. Two (2) integrated circuits are also positioned on the surface of the IC3600SBMB which are labeled with the letter U. Many small black transistors which are shaped like half-circles are featured on the top half of the IC3600SBMB. A number of very small black diodes labeled with the letters CR can be seen all over the IC3600SBMB.
