About the IC3600SCBD1
Greater Product Series Information
The IC3600SCBD1 printed circuit board (PCB) was manufactured by General Electric (GE) for the Mark II line of turbine control equipment. Mark II, or MKII, is the second generation in the Mark series for controlling gas turbines. This IC3600SCBD1 Component Output Circuit Board device's greater Mark I or Mark II product series must be embraced as a non HazLoc-certified product series that does not accept any potential alternative energy-focused product applications, as it is more than likely the very first Mark product series rendition produced by the trusted manufacturer.
Hardware Tips and Specifications
The IC3600SCBD1 contains two large parts. The IC3600SCBD1 contains both a main printed circuit board and a smaller metal plate which is attached to it. The printed circuit board contains a number of different components:
- two (2) large capacitors are located on the lower part of the middle of the circuit board
- solid yellow/voltage of 200 volts (200VDC)
- part number X663F written on the components
- five (5) resistors
- three (3) of these resistors are medium-sized
- brown in color
- feature multi-colored bands of brown, black, red, gold, green, and yellow
- one (1) other resistor is solid black in color
- in the middle of these medium-sized resistors is one (1) large resistor
- this large resistor is also brown with various colored bands
- the bands on this resistor are yellow, purple, brown, and gold
On the metal plate which is attached to the circuit board, there are a number of meters and dials. One large meter at the top of the metal plate measures the output voltage of the device. Below this meter there is a dial which can be used to adjust gain. There are also components which are used for Input, Output, Aux-F, and COM. This IC3600SCBD1 Component Output Circuit Board device is seemingly definable as the first-produced option of its specific Mark Series functional role.
