About the IC3600SCBH1
The IC3600SCBH1 was created by General Electric (GE) as a part of the Mark I-II system. The Mark I and Mark II were the initial two systems to be introduced in the Speedtronic Mark series. The Mark series was designed to manage and automate all gas turbine processes. The Mark series provide excellent control, sequencing, and protection of gas turbines.
The IC3600SCBH1 is made up of two main parts. The biggest part of the IC3600SCBH1 is a large rectangular printed circuit board (PCB). The other part of the IC3600SCBH1 is a large metal plate which is attached to the side of the printed circuit board. The printed circuit board features many various circuit board components. One yellow capacitor which is large in size is located near the top of the IC3600SCBH1. A large black capacitor, which resembles a battery, can be found near the bottom right corner of the IC3600SCBH1. A long series of silver prongs is very noticeable on the right edge of the IC3600SCBH1. These prongs are used to connect the IC3600SCBH1 to the other parts of the Mark I-II system. A variety of other electronic components such as resistors and diodes can be found on the PCB portion of the IC3600SCBH1. The large metal plate contains a few large components. At the top of the plate, there is a large red button which is round. A large grey dial is situated in the center of the plate. Near the bottom edge of the plate, there is another large dial which is black and silver in color.
