About the IC3600SIXJ1C1B
The IC3600SIXJ1C1B is what is called a power supply selector control card. This is a form of PCB or printed circuit board. The IC3600SIXJ1C1B is a component in the Mark I and Mark II series by General Electric or GE. The Speedtronic Mark I and Mark II were the first two (2) series manufactured and released for the Mark series by GE.
The IC3600SIXJ1C1B is a printed circuit board which is smaller in size. Lined up along the lower edge of the PCB is a long line of metal prongs which are silver. The numbers one (1) through fifty-one (51) are written on the surface of the IC3600SIXJ1C1B. Directly above this series of prongs is a pair of two (2) large capacitors which are orange. The numbers 8503(5) and 8512(5) are written on the top of these capacitors are well as the temperature one-hundred ten (110) degrees celsius. A large silver plate which is made of metal is sitting directly above these two (2) large capacitors. On either end of this plate, there is a large black knob which controls a switch. Eight (8) resistors are featured on the PCB directly above the metal plate. These resistors are arranged into four (4) pairs. The resistors on the top are solid black. These are labeled with the names R5, R6, R7, and R8. The resistors below these are solid yellow. They are labeled as R1, R2, R3, and R4. A series of ten (10) jacks which are dark brownish red are located on the top half of the IC3600SIXJ1C1B. Each jack contains a pair of ports which can be used to connect other parts to the PCB.
