About the IC3600SLEH1C
The IC3600SLEH1C is what is called a fanuc logic element board. This device is a type of PCB or printed circuit board. The IC3600SLEH1C was created for the Speedtronic Mark I-II series by General Electric (GE).
A long metal part is attached to the left border of the IC3600SLEH1C. Contained within this grey metal part are five (5) large red LEDs or light-emitting diodes. These LEDs are spaced out evenly throughout the metal piece. Fifteen (15) transistors which are black and made in a half circle shape are placed on the IC3600SLEH1C on the left half. Each of the black transistors also has a white spot on the top. In the center of the IC3600SLEH1C, there are three (3) brown components which are arranged in a vertical row. Each brown component also contains a silver metal piece at the top. To the right of these brown components is a collection of yellow capacitors which is arranged vertically. These capacitors contain a voltage of two-hundred (200) volts DC. Much of the IC3600SLEH1C is covered with long lines of resistors that are light blue with multi-colored bands. These bands may be blue, black, white, red, and many other colors. These resistors are situated among the many other components. Spanning the length of the IC3600SLEH1C on the right border is a long line of small resistors. These resistors are smaller than the blue resistors. They are covered in bands that are red, yellow, and black. Listed along the IC3600SLEH1C’s right edge are the numbers one (1) to fifty-one (51). These numbers are used to identify a row of metal prongs which may be used to connect other boards to the IC3600SLEH1C.
