About the IC3600SLEH1G1
The IC3600SLEH1G1 is a fanuc fifty-one (51) pin logic element board. The IC3600SLEH1G1 is a type of printed circuit board or PCB developed for the Mark I-II series by General Electric or GE. The Mark I and Mark II are two (2) versions of the Mark gas turbine control series. These turbine systems have been in use all around the world in a variety of industries for decades since the debut of the Mark I in 1969.
The IC3600SLEH1G1 is a large PCB that is green and rectangular. A large piece of grey metal is attached to the long right edge. Within this metal part there are five (5) light-emitting diodes or LEDs for short which are red. Each diode has been labeled with the initials CR. Fifteen (15) black transistors that are shaped like half-circles are aligned in the middle and on the left half of the IC3600SLEH1G1. Each transistor features a white dot on its top. Also aligned near the center of the IC3600SLEH1G1 there is a line of five (5) yellow capacitors. The capacitors have been identified by the part number 708D1. Each yellow capacitor has a voltage of eighty (80) volts. Many red diodes have been placed on the right side of the IC3600SLEH1G1. These diodes are numbered one (1) through nine (9) and thirteen (13) through twenty (20). A grey band is located in the middle of the diodes. A series of light blue resistors which are banded in different colors spans the length of the left side of the IC3600SLEH1G1.
