About the IC3600SLEH1G1C
The IC3600SLEH1G1C is a FANUC logic element board. This is a type of printed circuit board or PCB. The IC3600SLEH1G1C was made for the Speedtronic Mark I and Mark II series by General Electric or GE. The Mark I and Mark II were the earliest series in the Speedtronic lines for turbine control by GE. The board functions as a Logic Control board.
The IC3600SLEH1G1C is a circuit board that is large and rectangular. Ten (10) transistors are lined up in the center of the PCB. These transistors are arranged in five pairs. The transistors are solid black and half-circle shaped with yellow on the top. Five (5) more transistors are aligned on the left half of the IC3600SLEH1G1C. Each of the transistors is labeled with the letter Q.
In the center of the IC3600SLEH1G1C, there is a line of five (5) yellow capacitors arranged from top to bottom. Many small resistors are featured on the left half of the PCB. Each resistor is colored light blue. It has bands that are blue, red, orange, brown, and green. The resistors are arranged in groups of seven (7) or eight (8).
Numerous small components are positioned on the right side of the IC3600SLEH1G1C. These small components are all red with small bands in the center. All of these small components are arranged into groups of eight (8) or nine (9).
A long right-angled backplane connector is attached to the rear edge of the IC3600SLEH1G1C. Five (5) diodes are featured in this part. Three (3) brown components are aligned in the middle of the IC3600SLEH1G1C. These components are almost square-shaped and they have metal pieces at the top.
AX Control ships worldwide, to any location not under US embargo.
