About the IC3600SSKA1F
The IC3600SSKA1F consists of two separate parts. These are a large printed circuit board (PCB) and a large metal plate that has been fixed to the edge of the circuit board. The printed circuit board features numerous electronic circuit board components. A long line of metal prongs is situated on the right edge of the IC3600SSKA1F. These prongs are used to connect the PCB to the rest of the system. Printed along the right edge of the IC3600SSKA1F is a series of numbers in white print from 5 to 50 counting by fives. Several capacitors which are yellow can be easily seen on the surface of the board. One of these capacitors is connected to the PCB with a long green wire. At least one capacitors which is solid dark red and shaped like a rectangle is also featured on the IC3600SSKA1F. Many small transistors are also located on the IC3600SSKA1F. These transistors are silver in color and round. The IC3600SSKA1F features seven potentiometers on the left side of the PCB. The potentiometers are solid blue in color. These devices can also be called variable resistors. They each contains a dial which can be adjusted to change the level of resistance. A wide variety of other resistors, capacitors, and diodes can be seen on the IC3600SSKA1F, all of which are identifiable with reference designators in white writing. The metal plate attached to the printed circuit board have been placed on the left side of the IC3600SSKA1F. This plate contains seven buttons. The buttons are red in color and round. These buttons all have various purposes.
