About the IC3600SSKA1G1C
GE or General Electric created the IC3600SSKA1G1C for the Mark I-II turbine control series. The IC3600SSKA1G1C features a printed circuit board (or PCB) and a metal plate which is attached to its side.
The primary component of the IC3600SSKA1G1C is a large PCB or printed circuit board. The secondary part of the IC3600SSKA1G1C is a large metal plate which is connected to the side of the circuit board. Along the right side of the IC3600SSKA1G1C, there is a line of more than forty (40) metal prongs. The IC3600SSKA1G1C can be connected into the larger turbine system using these metal prongs. The numbers five (5) through fifty (50) in increments of five are written along the edge of IC3600SSKA1G1C. A series of small yellow capacitors can be easily seen on the surface of the IC3600SSKA1G1C. Some of these capacitors may be connected by wires to the printed circuit board. Some of the capacitors situated on the IC3600SSKA1G1C may be solid red and rectangular in shape. The IC3600SKA1G1C also features several small transistors. The transistors are made of a silver metal and are circular. A line of blue potentiometers can be found on the left side of the IC3600SSKA1G1C. Each component features a dial which changes the level of resistance when adjusted. A collection of various other resistors, diodes, and capacitors are situated on the IC3600SSKA1G1C. Reference designators are printed in white writing on the surface of the IC3600SSKA1G1C which identify the components on the PCB. The plate which is connected to the left side of the IC3600SSKA1G1C features a group of seven (7) red buttons which perform different functions.
