About the IC3600SSLB1
The IC3600SSLB1 is a printed circuit board or PCB designed to be a part of the Mark I-II series of equipment for gas turbine management. The Mark line was meant to control all kinds of gas turbines. The Mark I was the inaugural series in the Speedtronic Mark line and the Mark II was released only a few years later. The IC3600SSLB1 is a printed circuit board, also known as a PCB.
This PCB is rectangular in shape. The IC3600SSLB1 contains several different types of electronic components. Four silver capacitors are featured on the top half of the board. These capacitors are arranged in a square shape. Written on the outside of each capacitor is the device’s voltage. Many other capacitors in various colors, sizes, and shapes are featured on the IC3600SSLB1. Many of these capacitors are solid yellow. These are clustered near each other on the lower half of the IC3600SSLB1. Some of the capacitors on the board are rectangular and a solid dark red in color. Two potentiometers, which may be called variable resistors, can be found on the left side of the lower half of the IC3600SSLB1. Each potentiometer contains a small knob which can be used to adjust the device’s resistance. Many transistors can be found on the IC3600SSLB1 which are small and black. These transistors are half-circle shaped. Along the right edge of the IC3600SSLB1, there is a series of prongs which are made of silver metal. These prongs may be used to connect the IC3600SSLB1 to the larger Mark I or Mark II system.
