Product Description
The IC3600SSVA1F1C is a printed circuit board (PCB) made by General Electric (GE). This product is one of many parts in the Speedtronic Mark I-II series. These series were the earliest systems released for GE’s Mark turbine management line. The IC3600SSVA1F1C is a servo valve control board.
A servo valve is a part which provides a system with positional accuracy, repeatable velocity, predictable force, and torque regulation.
The IC3600SSVA1F1C features a plate which contains five (5) components and has an opening for two (2) additional components. At the top of the plate, there are two (2) large red light-emitting diodes or LEDs. The LED on the top is marked with the label CUR. LOOP. The LED below this one is labeled as POS. LOOP. One (1) button is situated in the center of this plate. This round red button is labeled with the word RESET. Below this button, there are two empty openings which can be used for other parts. These are labeled with the initials POS. The openings are also labeled with ZE and RO and GA and IN. At the bottom of the plate, there are two plug-ins labeled as J1 and J1. Together, these plug-ins are labeled as TEST. The IC3600SSVA1F1C features three (3) blue potentiometers. A small knob is featured on every potentiometer which can be used to change the device’s resistance. Two additional potentiometers which are black can also be found on the IC3600SSVA1F1C. A series of resistors is featured all over the IC3600SSVA1F1C. Some of the resistors are light blue and some are dark. These resistors are patterned with a variety of colored bands.
