About the IC3600SSVB1
The IC3600SSVB1 is a servo pressure control card. This printed circuit board or PCB was developed for the Mark I-II series. The Mark I and Mark II were the earliest versions in the Mark line which was made to control and automate gas turbines. The Mark line of equipment was designed to fulfill all of the needs of gas turbines.
The IC3600SSVB1 features two large resistors on the right side of the board. One of these resistors is solid black and the other is grey. On the opposite side of the IC3600SSVB1, there are four solid blue potentiometers. Otherwise known as variable resistors, these potentiometers contain small knobs which enable the operator to adjust the device’s level of resistance. A variety of components is featured in the center of the IC3600SSVB1. Three large silver transistors are featured in the middle of the board as well as a few smaller black transistors. A series of resistors which are different sizes and feature bands of different colors can be found in the center of the IC3600SSVB1. Several capacitors in orange and yellow can be found there as well as a few solid black capacitors. Several diodes are also located on the IC3600SSVB1. These diodes are multicolored and can be found mainly on the edges of the circuit board. Situated along the right edge of the IC3600SSVB1 is a series of metal prongs. These prongs are useful for connecting the IC3600SSVB1 to the other parts in the Mark I or Mark II series.
