About the IC3600SSVD1H
The IC3600SSVD1H is a servo drive control board. This is a type of printed circuit board or PCB.
The IC3600SSVD1H features many different circuit board components. A line of five (5) solid blue potentiometers as located on the left edge of the PCB. These potentiometers, also known as variable resistors, contain small knobs which enable a user to adjust the part’s resistance level as needed. One large inductor or coil is situated directly in the center of the IC3600SSVD1H. Inductors consist of round coils of wire which are covered in black plastic. Two round red components known as MOVs or metal oxide varistors may be seen on the right half of the board. Many various resistors which contain multicolored bands are positioned all over the IC3600SSVD1H. Also found on the IC3600SSVD1H is a variety of capacitors. These capacitors may be yellow or silver in color. Several transistors can be seen on the printed circuit board portion of the IC3600SSVD1H. Many of these are round and silver while others may be smaller, half moon shaped and black in color. A large metal plate which makes up part of the IC3600SSVD1H is attached to the left edge of the printed circuit board. One (1) large light-emitting diode, or LED, is located near the top of this metal plate. The light on this LED is red. At the bottom of the metal plate are two orange dials which an operator can adjust when needed. These dials are attached to the surface of the PCB with white wires.
