About the IC3600STKH1
The IC3600STKH1 temperature control circuit board was made by General Electric (GE) to be a component in their Mark I-II line for turbine management. The Mark I and Mark II are series in the Speedtronic Mark line which have been used for decades to provide superior gas turbine operation and protection.
One (1) relay is featured at the very top of the IC3600STKH1. Also referred to as a contactor, this relay is rectangular and black. It features grey parts on either end. Four (4) potentiometers which are blue are positioned on the left side of the IC3600STKH1. These potentiometers feature small metal dials which are used to adjust the potentiometer’s resistance. These are sometimes referred to as variable resistors. The IC3600STKH1 features many capacitors in a variety of colors and shapes. One (1) silver capacitor can be seen in the middle of the potentiometers. Various yellow capacitors are dispersed throughout the PCB. A dark blue capacitor is positioned near the lower right corner of the IC3600STKH1. Many dark red capacitors which may be round or rectangular can be seen in various places all over the IC3600STKH1. Six (6) round silver transistors are situated on the surface of the IC3600STKH1. A number of transistors which are smaller and black may also be seen. Several resistors, many of which are red and banded in different colors are located among the other components. The remaining space on the IC3600STKH1 is taken up with a range of components such as capacitors, resistors, diodes, and metal prongs.
