About the IC3600STKK1J
The IC3600STKK1J is a temperature control board made by General Electric. This part is a component in the Mark I and Mark II series of turbine management. The Mark I and Mark II were the earliest two series GE’s Speedtronic Mark line. These series were first introduced in 1969 (MKI) and 1973 (MKII).
The IC3600STKK1J temperature control board features a long plate. This plate features two components on its lower half. The component on top of a light-emitting diode or LED which is labeled as FAULT. Below this LED is a small round red button which is labeled as RESET. Higher up on the board, the words GAIN R67, TAKEOVER R66, BASE R69, and PCD were featured. On the surface of the green printed circuit board, a number of various components are featured. Four (4) potentiometers which are blue can be found on the IC3600STKK1J. Three (3) of these potentiometers are grouped together on the left edge of the PCB and the third is situated higher up on the board close to the center. Two (2) capacitors which are silver with red on the ends can be seen on the IC3600STKK1J. These capacitors are identified by the initials C1 and C2. There are seven (7) integrated circuits which can be found in various positions on the IC3600STKK1J. Five (5) of these feature their part numbers which are SM9618 and LM74CN. The other two integrated circuits, which are paired together near the left side are labeled with their part numbers which are MC836P and FJH9711 and MC846P and FDI9731.
