About the IC3600TPSB1
The IC3600TPSB1 is a component for the Mark I series. This board will also fit the Mark II series. The MKI and MKII were designed to increase the efficiency and reliability of heavy-duty gas/steam turbines by creating a management system that would utilize integrated fail-safes within the design itself to minimize downtime, as well as maximizing efficiency through the automation of procedures like start-up and shut down.
The IC3600TPSB1 is a significantly empty board devoid of many components. Roughly 50% of the board is empty. The IC3600TPSB1 is built with two transistors. The first of these is a small black transistor. The second is a power transistor (marked RCA,) that is fitted into a heat sink. The heat sink is utilized to dissipate heat from the component to allow it to function more efficiently. This transistor is wired from one pole to the board using surface wiring. This component is connected to the board by two screws. The board has four carbon composite resistors of varying resistance. Below these is a line of eight diodes.
The board is marked with several codes. This includes 68A989114, 002/01, 006/01, ADS, 003/01, and numbering along one edge. This board edge is populated with a series of right-angled metal pins. The board also has the GE ‘USA’ logo.
The warehouse team at AX Control will carefully pack the IC3600TPSB1 for shipment, including the use of a static reducing material to protect the part during transport. Please review manuals or data sheets from the manufacturer for safety data before beginning installation of your new part.
