About the IC3600TPSC1
The IC3600TPSC1 is a component for the Mark I series from GE. This board also fits the Mark II series. The Mark I and the Mark II were the first of the Speedtronic series designed by GE for the management of steam and gas turbines. These series were created to improve the efficiency and reliability of GE’s heavy-duty turbines. These series are now obsolete and no longer receive support from the original equipment manufacturer.
The IC3600TPSC1 is built with one trim potentiometer. Trim potentiometers are sometimes used to calibrate circuits. The board is built with nine small transistors and one single power transistor. This transistor is wired to the board using surfacing wiring. It is surrounded by a large heat sink. The heat sink is meant to dissipate heat from the transistor in a quicker, more efficient manner to allow the transistor to continue working at an optimum level.
The IC3600TPSC1 has two large aluminum electrolytic capacitors. Both of these are marked D46188. The board also has a smaller aluminum electrolytic capacitor, a polyester vinyl capacitor, and several ceramic capacitors. The board has diodes and resistors which are usually mounted vertically. It also has several components marked TP1-TP6. The board is printed with silver traces which connect empty through-holes.
The IC3600TPSC1 is marked on one edge with numbering. This edge has a line of metal pins. The opposite side of the board is drilled in both corners.
The IC3600TPSC1 will ship in a protective static-reducing covering. Your sales representative will discuss shipping options with you during ordering. AX Control works with several carriers and offers many shipping options.
