About the IC3600VANA1D1
The IC3600VANA1D1 is a component for the Mark I/Mark II series from GE for gas/steam heavy-duty turbine management. The MKI and MKII are capable of the management of heavy-duty turbines ranging from 4000 hp to 400 Mw, and were designed by GE to be adaptable and scalable for many types of turbine systems. Neither the MKI or the MKII are currently supported by GE and are considered obsolete.
The IC3600VANA1D1 has eleven integrated circuits. The circuits have been placed on the board in a single line of three along the center line that bisects a line of four. This line is parallel to another line of four. Next to the circuits are twelve transistors. These are marked Q1 through Q3. Diodes on this board are marked “CR.” The board uses both metal film and carbon composite resistors. Designators may be used on more than one component. In other words, there may be more than one resistor marked R3 or R5.
The IC3600VANA1D1 is marked on the board 68A944111, 003/06, 002/05, and 006/09. The board is numbered on one edge below a line right-angled metal pins. This line is a communication instrument between the board and the Speedtronic system. The board also has five additional right-angled pins on the opposite long edge. These are marked either as TJ1 or TJ2.
The IC3600VANA1D1 will be shipped from our warehouse to you protected by a static-reducing sleeve. If your facility has retained manufacturer publications like datasheets and manuals, these are excellent resources for safety data and installation procedures.
Our team at AX Control is happy to search for any part you need. If you don’t see it on our website, please contact us directly.
