About the DS3800DGRA1E1B
The GE Regulator Turbine Control Board DS3800DGRA1E1B is designed for secure and easy installation in the drive. The board features one hole in each corner for installation using screws. The GE Regulator Turbine Control Board DS3800DGRA1E1B also is populated with 1 trimmer resistor and multiple potentiometers with dial settings. The board is also populated with multiple wire terminals and multiple jumpers.
The potentiometers on the GE Regulator Turbine Control Board DS3800DGRA1E1B require some consideration when you install the board. The board is populated with 28 potentiometers. The potentiometers adjust the resistance supplied by the device and they change the processing of the board. Each potentiometer adjusts 1 function provided by the board. The outside edge of the potentiometer turns and allows for the adjustment. Adjust the potentiometers to maximise the processing required to control the drive.
It is important that you record the settings of each potentiometer. Keep the written record with the service guide and all material about the board. Keep it with the configuration instructions about the wire terminals, the trimmer resistor, and the jumpers. If you find the need to replace the board, it is a simple task to retrieve the records and set the components to the same values. This ensures the replacement board will work the same as the original board.
The GE Regulator Turbine Control Board DS3800DGRA1E1B is also populated with 2 40-pin connectors. The connectors face out from 1 edge of the board. They are designed to connect to 40-pin ribbon cables. The connectors are fitted with retention latches.
