About the DS3800DGRC1B1C
The DS3800DGRC1B1C is a regulator circuit board for generators. General Electric produced this regulator circuit board as part of the Speedtronic Mark IV series of gas turbine controls.
The DS3800DGRC1B1C has 32 square gold capacitors on one side of the board. There are three large yellow battery-shaped capacitors, as well as two medium-sized battery-shaped yellow capacitors and seven small yellow battery-shaped capacitors. The circuit board features two black connector ports--one larger and one smaller. There is one red and one black switch on the side of the circuit board between the two black connector ports. On one side of the board is a series of jumper pins with blue jumpers. These jumpers enable an operator to changes thefunctions of the board. The board has a few small multicolored striped diodes and resistors. There are also several small dark red resistors on the board. The DS3800DGRC1B1C regulator board is labeled A through J in white lettering on one of the long sides of the rectangular board.
The DS3800DGRC1B1C is a voltage regulator circuit board. Voltage regulators are often used to regulate voltage levels for operation in a system. When reliable and consistent voltage is required in a system, a voltage regulator is ideal. A consistent voltage is generated with a voltage regulator, that staying constant despite any changes in the conditions or input voltage. Additionally, the voltage regulator functions as a buffer protecting the parts from any electrical damage.
AX Control will ship the The DS3800DGRC1B1C in a static bag, which will discharge all static energy before handling for consumer safety. Any troubleshooting and technical support for the regulator circuit board would be provided by GE.