DS3800DGRD1C1B

About the DS3800DGRD1C1B

The DS3800DGRD1C1B is an auxiliary circuit board. This board was made by General Electric, developed as part of the Mark IV turbine control series.

Included on the DS3800DGRD1C1B board are several capacitors of various sizes, including a few 100 and 80 volt capacitors. One side of the DS3800DGRD1C1B board is occupied by several black resistors, or potentiometers, labeled in Ohms with the lowest, middle and highest settings. The DS3800DGRD1C1B auxiliary card has a series of jumper pins which come with blue-colored jumpers, allowing the operator of the board to make changes. On the DS3800DGRD1C1B board is an array of resistors and diodes in various colors. The board features black connector ports positioned on one of its sides. The board has one red and one black switch positioned between the connector ports. The DS3800DGRD1C1B has a line of test points beside the jumpers. The Speedtronic Mark IV System was generated from its predecessor Mark systems, Mark I and Mark II. The earliest Mark series were based such emerging technologies as turbine control automation, sequencing and protection, which have been improved over many years. The Mark IV system is the result of years of innovating and improving these new technologies. The Mark IV turbine was built to fulfill all the requirements of turbine control, including the controlling of fuels, with consideration given to speed and load control.

The DS3800DGRD1C1B will be shipped in a static bag, which dissipates any static energy prior to opening. Any technical support or troubleshooting required is typically managed by GE (General Electric), the manufacturer of the device.