DS3800DGRD1D1C

About the DS3800DGRD1D1C

The DS3800DGRD1D1C is an auxiliary circuit card manufactured by General Electric. The card is part of the Speedtronic Mark IV series of gas turbine controls.

The DS3800DGRD1D1C auxiliary circuit card features a 218A4637P4 34-pin male connector port and a 218A4637P6 40-pin male connector port. The card also has many small capacitors labeled C23 through C44 and multiple multicolored striped resistors and solid colored resistors labeled R1 through R212. The circuit card has 48 jumper pins labeled J1 through J48. These jumpers allow the user to re-configure the circuit card. The circuit card contains 25 test points labeled TP1 through TP25. These test points allow the manufacturer to test that the card is working correctly and later allow the user to repair the device in the event that it malfunctions or to recalibrate the device after components are replaced. The DS3800DGRD1D1C has many blue and black diodes labeled CR. The card also contains one black switch labeled SW1 and one red switch labeled SW2.

The Mark IV Gas Turbine Control System by Speedtronic was derived from their Mark I and Mark II systems. The earlier Mark systems were based on successful automation of turbine control, protection and sequencing techniques dating back fifty years. The Mark IV system is designed to control all aspects of gas turbine control, including control of fuels and protection against dangerous working conditions.

The DS3800DGRD1D1C will be shipped in a static bag, which will discharge any energy before the card is handled by the user. Any technical support for the product should be provided by the manufacturer, General Electric.