DS3800DMPK1B1A

About the DS3800DMPK1B1A

The GE General Regulator Board DS3800DMPK1B1A features 14 erasable programmable read-only memory (EPROM) modules. The GE General Regulator Board DS3800DMPK1B1A also is populated with 2 34-pin ribbon cables, 2 single-pin connectors, and 17 jumpers.

To achieve satisfactory results, you must install the drive on a wall or other vertical space that enables the drive to run in a cool environment. Normally the drive operates surrounded by other heat generating devices and so planning is important. There are severals ways that the room can be kept cool, despite the presence of many heat generating devices. Often fans are installed in the room which can be very helpful. The fans allow the air to move over the heated components and allow the air to circulate freely. If you choose to install fans, make sure they are in good working order and you have enough to move air around the equipment. Install industrial fans that mount on the walls so that they are not a trip hazard and can move air from the ceiling where the hot air accumulates.

Another method of keeping the room cool is using hoods that collect hot air above the equipment and exhaust it from the room. While very effective, hoods require ductwork be installed to exhaust the hot air and once installed, the equipment must remain under the hoods. However, they are also useful if dust and hazardous chemicals are also vented by the equipment. The dust and chemical are vented out of the room along with the heat.