DS3800DXRC1D1B

About the DS3800DXRC1D1B

The DS3800DXRC1D1B is a receiver mod made for Speedtronic Mark IV line by General Electric. The DS3800DXRC1D1B has many different components. There are thirteen (13) light blue diodes, there are nine (9) resistors all banded differently to indicate its bandwidth. There are three silver capacitors. There is a single red-light diode. There are two black covered connector ports, there is also a ribbon harness to connect to other boards or equipment. There is a single orange Potentiometer with a single silver knob. There are twenty-one (21) black rectangles. There are thirteen (13) EPROM, and eight (8) EEPROMs* There are four curved metallic circles. There are thirty-four (34) pairs of prongs known of Jumper ports. There are eighteen (18) sets of plastic covers that can be moved around these Jumper ports to arrange how the current flows through the board.  There is also two silver surface mount ceramic capacitors. Each component is numbered and lettered in a dark green. Each component is also outlined in dark green lines. The part number DS3800DXRC1D1B is printed along the side. There are plastic anchors in each corner to secure it to a motherboard. The traces along the board are drawn in a shiny silver print.

Our fantastic staff at AX Control would love to get you a quote today. We take great pride in how we package and ship our products. This circuit board will be shipped in its own static bag to prevent energy build up and discharge while being shipped.

*EPROM is a re-programmable an EEPROM is not re-programable.