DS3800HCPC1J1G

About the DS3800HCPC1J1G

The DS3800HCPC1J1G is a PCB, or printed circuit board manufactured by GE. It has been designed to work within a Mark IV/Speedtronic gas and steam turbine control system. The Mark IV was designed to limit downtime caused by electronics failure.

The DS3800HCPC1J1G the following specifications:

• it has an A/D analog converter--AD574AKD 1536 E279199 to convert analog signals to into digital data.

• it has two potentiometers

• it has seven resistor network arrays

• it has one transistor

• it has a Xilinx Xc 2064-50PC68C Logic cell array. This is an extendable, flexible, user-programmable array.

• it has a XICOR X2816BP-25 Alterable Eprom in the (U9) location

• it has a Motorola MC74HC139AN Decoder/Demultiplexer in the (U16) location

• it has a P9206 DM74LS123N DIP pin in the (U17) location

• it has SRM2264LC10 located in the (U6) and (U7) locations

• it has a CD 74HCT54IE RCA H741 I/O module at the (U19) location.

• it has one jumper pin

• it has four 10-pin male headers for an Arduino Shield.

• it is marked on one short edge A B C D E

• it is marked on one long edge 1 2 3 4 5 6 7 8 9 10

• it is marked 6ba08

• it has multiple ceramic covered, metal film resistors

• it has several capacitors of differing values.

The corners of this board are chamfered and slotted. Additionally, it is factory drilled in two opposing corners.

Safety procedures and installation guidelines for the DS3800HCPC1J1G may be found within original manuals and data sheets published by the manufacturer. Technical support for the DS3800HCPC1J1G was originally provided by GE.