DS3800HCVA1G1F

About the DS3800HCVA1G1F

The GE Digital to Analog Output Board DS3800HCVA1G1F features a modular connector for attachment to a drive and retention levers to hold the board in the drive. The GE Digital to Analog Output Board DS3800HCVA1G1F also is populated with 14 jumpers, and 2 amber indicator LEDs. The board also has 3 connectors accessible from the front of the board, and 4 trimmer resistors.

The trimmer resistors can be adjusted to change the resistance of the component. The trimmer resistors provide a means for a qualified technician to tailor the board to the exact needs of the drive. The trimmer resistors come from the factory adjusted to a standard resistance value. If you find that the processing provided by the board is in need of tailoring, remove the board from the drive, first. Place the board on a flat and sturdy surface. This might be a desk or table. The surface must be free of dust, dirt, and clutter. Have on hand a full function testing device. The testing device must be calibrated to provide exact results. Also, the probes must be designed for use with the tester and they must be in good condition. Look for missing or worn insulation.

Locate the trimmer resistor you want to adjust. The trimmer resistors are part of circuits on the board. Use a diagram of the board to determine which trimmer resistor is part of the circuit you want to tailor. The diagram is available in the product information supplied by the factory. You will find it package with the original board you receive from the factory.