DS3800HDRA1A1A

About the DS3800HDRA1A1A

The GE Line Driver/Receiver Board DS3800HDRA1A1A features a modular connector for attachment to a drive and retention levers to hold the board in the drive. The GE Line Driver/Receiver Board DS3800HDRA1A1A also is populated with 2 jumpers, and multiple capacitors. The board also has 2 40-pin connectors accessible from the front of the board.

Another component of the board is a transistor to transistor logic (TTL) device. It serves as the interface logic between integrated circuits. The GE Line Driver/Receiver Board DS3800HDRA1A1A is installed in a drive that contains high-voltage electricity and also contains a powerful electric motor and other moving parts. For this reason, it is a potentially dangerous device. Without proper consideration an individual can be exposed to electricity that can shock or burn. The motor and other moving parts can cause bodily injury. Part of the planning for installing the board must be to inspect the area around the drive and look for unsafe conditions.

The floor around the drive must be dry to the touch. Any liquid can conduct electricity and cause a shock. Dry the floor with towels or use other means to dry the floor. If condensation is the cause of the moisture, you might consider installing dehumidifiers. A floor that is constantly wet is a danger to the operators and servicers that work in the area.

Inspect the area around the drive and if you find ungrounded electric cords, remove them. They can cause a shock because they lack a ground connection. Clean any oil or grease from the floor. Oil and grease are a trip hazard and can injure operators, servicers, and technicians.