DS3800HMPK1E1D

About the DS3800HMPK1E1D

The GE Microprocessor Board DS3800HMPK1E1D is designed for quick installation in the drive. The board features a modular connector on 1 end and retention levers on the other end. The GE Microprocessor Board DS3800HMPK1E1D also is populated with 3 red indicator LEDs and 1 amber LED which are visible from the front of the board. The board also is populated with a microprocessor, erasable programmable read-only memory (EPROM) modules, and a 34-pin connector. It also is populated with 2 50-pin connectors.

When the replacement GE Microprocessor Board DS3800HMPK1E1D is shipped to you, there are some steps to take to ensure the installation of the board is quick and easy. Before you open the box inspect the box for dents or holes, or gashes in the cardboard. They might be signs that the board was was mistreated during shipping.

Next, look for the shipping label attached to the outside of the box. You will find the model number and other identifying information. Make sure the model is the same as the board you planned to purchase. Peel off the shipping label and keep it with your other information about the board. If you have to call for service, it will reduce the length of the service call if you have all the information with you before you call.

You will note that the EPROM module socket is unpopulated when you receive it. Part of the installation is to remove the module from the old board and install it in the new board.