About the DS3800HPIB1F1D
The DS3800HPIB1F1D is featured in the Mark IV Speedtronic Turbine. This large sized board is manufactured by General Electric (GE). The DS3800HPIB1F1D has a total of forty-six EPROM and EEPROM. These hold the circuit boards programs. The EPROMs programming can be adjusted. The EEPROMs cannot be changed. There are thirty-six red raised LEDs or light emitting diodes. There is a small red covered switch along with eight red towers on the DS3800HPIB1F1D. The board also has eight slender capacitors that are yellow and have ten contact points with the board. There are nine male ports to connect the DS3800HPIB1F1D with other boards. Three are covered in white plastic and the others have a black plastic cover. Near some of the ports are six black posts with one flat side. The DS3800HPIB1F1D has sixty-eight diodes, fifty-one are a pale blue, and the rest look like glass with an orange tint. There are also nearly sixty resistors. These resistors have small bands around them. These bands specify how much energy each resistor can manage. Every part on the board has an identification number and letter. The board also has General Electric’s seal and where the board was assembled. The boards' short side is labeled A through J and the long end is labeled one through eight. The DS3800HPIB1F1D can be secured in place with its twelve screw ports.
AX Control has a dedicated knowledgeable staff. The staff at AX Control is pleased to be your go-to for the automation industry. Give AX Control a call for a hassle-free quote.