DS3800HRCA1C1B

About the DS3800HRCA1C1B

The DS3800HRCA1C1B is produced by General Electric (GE), for there Speedtronic Mark IV line. The circuit board has a black terminal plugin along one edge. This board can be attached to another or be secured in place. To install simply use the clips provided on the board and two small screws.  There are five lights or LEDs on this board one is yellow the others are red. The DS3800HRCA1C1B has two sets of Jumper ports. These ports have small covers that can be moved or removed to change to flow of energy across the board. There are a variety of diodes on this board of different colors and sizes. There is a small black diode, two silver diodes, three blue diodes, and nineteen yellow diodes. There are also five yellow capacitors and nearly fifteen resistors. The capacitors can store energy while the resistors help transport it. Each resistor is only capable of handling so much at one time. The capacity can be figured out with the color bands on each resistor. There are over thirty EPROM (memory card that can be reprogrammed) and four EEPROM (memory card that cannot be changed). There is a small raised black section where another EEPROM or EPROM may be installed if necessary along with a small section labeled “SPARE”. All of the boards' identification marks are help on with a silkscreen.

AX Control’s devoted staff is equipped to answer any question you may have. Allow AX Control to help you the right part you’re looking for.