DS3800HRRB1B1A

About the DS3800HRRB1B1A

The DS3800HRRB1B1A is produced by GE for their Speedtronic Mark IV Turbine line. The DS3800HRRB1B1A has a mixture of sixteen EEPROM and EPROMS. The EEPROMs can only be encoded once. Where the EPROMs can be encoded as needed. The DS3800HRRB1B1A has eight shiny rectangles that are referred to as crystal oscillators. A crystal oscillator is used to make an electrical signal with a precise frequency. There are seven thin barriers across the DS3800HRRB1B1A. The DS3800HRRB1B1A has nearly seventy regulators. Each regulator is only capable of holding so much current at any single time. The amount of current is designated in the stripes on the exterior of each resistor There is a masculine port and a feminine port located on the DS3800HRRB1B1A. The DS3800HRRB1B1A has eight red LEDs, eight off-white LEDs, and one yellow LED. The DS3800HRRB1B1A has nine little and round transistors. Transistors are used to improve or alter an electronic signal or an electrical flow. Transistors are semiconductive as well. Transistors have three spots that fasten it to the circuit board.  The DS3800HRRB1B1A has are four grey diodes, around thirty pale orange and nineteen sky blue diodes. The DS3800HRRB1B1A has four contact point one in each corner of the board to secure it in the existing setup. The DS3800HRRB1B1A features identification for each piece. Every piece is has a visual representation where it needs to be placed on the circuit board, as well as the part number (DS3800HRRB1B1A).

Call the friendly staff at AX Control today.