About the DS3800HRRB1C1B
The DS3800HRRB1C1B is manufactured by General Electric designed for their Mark IV Speedtronic Turbine line. The DS3800HRRB1C1B has seven thin barricades across it. The DS3800HRRB1C1B has approximately seventy regulators. Each regulator is only able to withstand so much energy at any time. The total amount of energy a resistor can withstand is designated in the stripes on the exterior of each resistor. The DS3800HRRB1C1B has a blend of sixteen EPROM and EEPROMS. The EPROMs can be encoded as needed. Whereas the EEPROMs can only be encoded once. There are two ports on the DS3800HRRB1C1B one male and one female. The DS3800HRRB1C1B has seventeen LEDs. The LEDs are varied in color. The DS3800HRRB1C1B has nine circular black transistors. Transistors amplify or change an electrical flow or an electronic signal. Transistors are made of a semiconductive material as well. Transistors connect to the circuit board with three legs. The DS3800HRRB1C1B has eight small silver rectangles that are known as crystal oscillators. The crystal oscillator is used to make an electrical signal with a very precise frequency. The DS3800HRRB1C1B has are around fifty-four diodes (which only have two contact points with the board). The DS3800HRRB1C1B has four places to secure the board to your existing system. There is one in each corner. The DS3800HRRB1C1B has labeled identification marks for every piece. Every piece is outlined to give a visual map of where each piece needs to be placed on the circuit board, as well as the part number (DS3800HRRB1C1B).
Call the knowledgeable staff at AX Control today.
