DS3800HSAA1R1J

About the DS3800HSAA1R1J

The GE Dom Plus Servo Amp Board DS3800HSAA1R1J features a modular connector on 1 end and retention levers on the other end. The board is populated with a heat sink. The analog/digital converter is a component embedded on the board. The GE Dom Plus Servo Amp Board DS3800HSAA1R1J is also populated with 1 34-pin connector and 1 socket for electrically erasable programmable read-only memory (EEPROM) modules. The board is also populated with 3 trimmer resistors.

The GE Dom Plus Servo Amp Board DS3800HSAA1R1J is populated with 1 EEPROM module socket. Additionally, if you obtain a replacement board, it comes with the module socket unpopulated. This gives the technician the opportunity to install the same module used with the defective board. To make sure the drive operates the same with the new board as it did with the previous board, it is important to use the same firmware and other instruction code. To remove the module from the defective board, pry off the module from the socket using a screwdriver. If you don’t plan to install it immediately, place it in a static-protective pouch or envelope. To install it, align it with the socket and press it into place.

The contents of the module can be erased and updated, if needed. The code is subject to updates to include improvements and fixes. If you notice a problem with the board, using updated firmware might include an update to fix the problem you are experiencing.