About the DS3800HSCA
The DS3800HSCA is part of the Speedtronic turbine control series. It is a circuit board manufactured by GE (General Electric). The Mark IV system is used to regulated and correctly operate a turbine system. Mark IV is a later version of the Mark systems, the earliest of which are called Mark I and Mark II. The Mark turbine operation and regulation systems were developed over several decades.
A long connector port situated vertically can be found on either side of the DS3800HSCA board. This allows other components to be connected to the board if needed. Sixteen transistors are situated in a vertical arrangement in the middle of the board. A variety of small diodes are arranged in the middle of the board. A group of larger yellow capacitors is located next to these small diodes. Next to the transistors are several resistors of many different colors. 9 light-emitting diodes are located on the right border of the circuit board. One of the light-emitting diodes is orange in color and the other 8 light-emitting diodes are red. A series of 13 integrated circuits can be found in the middle of the circuit board. Many different components are found on each of these integrated circuits, including capacitors, diodes and resistors.
GE (General Electric), the manufacturer of the DS3800HSCA circuit board, should be consulted for any necessary troubleshooting or technical support.
Like all our products, the DS3800HSCA1 is shipped packaged in a way that will get rid of any static energy before the product is handled.