DS3800HSCA1G1E

About the DS3800HSCA1G1E

DS3800HSCA1G1E is a printed circuit board made by GE (General Electric). This board was made to be part of the Speedtronic Mark IV series, which is responsible for the control and automation of gas and steam turbines.

The DS3800HSCA1G1E has twenty-one (21) integrated circuits. These integrated circuits contain multiple different electrical components on a single chip. Diodes, resistors and capacitors are all included on an integrated circuit. The integrated circuits on the board are designated with the letter U. Dozens of striped, multicolored resistors cover the DS3800HSCA1G1E board. These resistors are designated with the letter R, and range from R1 well into the 90s. Two (2) test points are situated on the right edge of the board. These test points allow the user to test the functionality of the board and make sure it is working correctly. Seventeen (17) medium-sized yellow capacitors are located on the right half of the board. These capacitors are designated with the letter C. Scattered around the board are much smaller yellow capacitors also designated with the letter C. Many multicolored diodes are scattered throughout the board and are designated with the letter CR. Eight (8) red-light emitting diodes (LEDs) are arranged in a line along the left border of the printed board. Next to the red light-emitting diodes is a single orange light-emitting diode. These light-emitting diodes are designated with the letters CR, ranging from CR2 to CR10. In the center of the board, sixteen (16) transistors are arranged in a vertical line. The transistors are designated with the letter Q, and range from Q1 to Q16.

AX Control will ship the DS3800HSCA1G1E in packaging that will rid the part of any static energy before it is opened by the user.