DS3800HSCC1D1D

Product Description

The DS3800HSCC1D1D is what’s called a non-isolator input board. DS3800HSCC1D1D is a 28 VDC (volts of direct current) circuit board. DS3800HSCC1D1D is part of the Speedtronic Mark IV series which was made by General Electric. A series of controls for turbines, the Speedtronic Mark IV has been used to ensure excellent performance in turbine operation and safety for decades.

DS3800HSCC1D1D contains 19 integrated circuits on its left half. Several different parts, such as resistors, diodes, and capacitors are featured on each integrated circuit chip. Placed on the DS3800HSCC1D1D’s right side are 16 LEDs, or light-emitting diodes. These light-emitting diodes are labeled with letters from A to F on the left side and with numbers from 1 to 9 on the right side. DS3800HSCC1D1D features a large connector port which takes up the entire left edge. Arranged in a vertical row on the right side of the DS3800HSCC1D1D is a collection of sixteen capacitors. A wide variety of different colored capacitors is positioned around the DS3800HSCC1D1D. Resistors covered in various shades of red, orange and yellow are situated all over the board. The resistance capability of each resistor is symbolized by the colored bands. A small area marked as SPARE is found at the bottom of the DS3800HSCC1D1D’s surface. The letters A to I are labeled on the top edge of the DS3800HSCC1D1D, while the numbers 10 to 80 are marked on the left edge by tens. DS3800HSCC1D1D, the full part number, is listed on the very bottom of the board’s surface.