DS3800HSCD1F1C

About the DS3800HSCD1F1C

The GE High Level Non-Isolated Input Board DS3800HSCD1F1C features a modular connector on 1 end and retention levers on the other end. The board is populated with a multiple capacitors. The board is populated with multiple transistor-transistor logic devices. The GE High Level Non-Isolated Input Board DS3800HSCD1F1C is also populated with 16 red indicator LEDs and 1 amber indicator LED. The board also has 1 socket for electrically erasable programmable read-only memory (EEPROM) modules. The board is also populated with 3 trimmer resistors.

The GE High Level Non-Isolated Input Board DS3800HSCD1F1C is installed in a drive that is powered by high-voltage current. For that reason special consideration must be given to the area surrounding the drive before any maintenance or service is attempted. Water is a conductor of electricity so can contribute to a shock hazard. Inspect the area around the drive and if any moisture or puddles of water are found, clean up the water before you start. Use a mop or towels to remove condensation. If condensation is a recurring problem, you might consider installing dehumidifiers to dry the air.

If puddles of water appear around the drive, look for the source of the water and repair any leaking pipes that contribute to the water problem. Another safety issue is the use of 2-wire extension cords. They are a shock hazard because of the lack of a ground wire. Remove them or replace them with 3-wire cords. If you use 3-wire cords, they must be plugged into a receptacle with a ground wire.