DS3800HSCD1G1D

About the DS3800HSCD1G1D

The GE High Level Non-Isolated Input Board DS3800HSCD1G1D features a modular connector on 1 end and retention levers on the other end. The board is populated with a multiple capacitors. The board is populated with multiple transistor-transistor logic devices. The GE High Level Non-Isolated Input Board DS3800HSCD1G1D is also populated with 16 red indicator LEDs and 1 amber indicator LED. The board also has 1 socket for electrically erasable programmable read-only memory (EEPROM) modules. The board is also populated with 3 trimmer resistors.

The drive in which the GE High Level Non-Isolated Input Board DS3800HSCD1G1D is installed requires some planning before the drive is installed. The drive requires a constant supply of cool dry air. The components in the drive generate heat and without room temperature air around it, the drive will overheat. Plan the installation so that at least 8 inches of clearance is available on the top, bottom, and sides of the drive. This will provide for air flow around the drive. Also, if other equipment is nearby, the heat generated by those devices will not interfere with the drive.

The drive is mounted on a wall or other surface. If the wall is hot to the touch, it might be that the room on the other side of the wall is hot due to drives or other equipment in the room. To resolve the issue, 1 solution is to remove some equipment from the room to cool the air temperature. Another solution is to install fans to circulate the air. Mount the fans on the wall and keep them off the floor. Make sure they are in good working order.