DS3800HSCD1J1C

About the DS3800HSCD1J1C

The GE High Level Non-Isolated Input Board DS3800HSCD1J1C features a modular connector on 1 end and retention levers on the other end. The board is populated with a multiple capacitors. The board is populated with multiple transistor-transistor logic devices. The GE High Level Non-Isolated Input Board DS3800HSCD1J1C is also populated with 16 red indicator LEDs and 1 amber indicator LED. The board also has 1 socket for electrically erasable programmable read-only memory (EEPROM) modules. The board is also populated with 3 trimmer resistors.

There are trip conditions that can occur in the drive in which the GE High Level Non-Isolated Input Board DS3800HSCD1J1C is installed. The trip conditions prevent damage to the drive by shutting down the drive before components are damaged. Over temperature is 1 trip condition. If the drive interior becomes too hot, the drive will automatically shutdown. This can have several causes. The drive has several air vents that are necessary to remain clear. The drive has many ribbon cables in the interior and if they block the air vents, the heat can build up inside the drive. If enough of the air is blocked, it can cause a trip condition.

Before you restart the drive, it is important to resolve the issue. Check the room temperature to see if it is too hot. Check the air vents to make sure that allow air to flow through freely.

Overcurrent is another trip condition. If the drive receives too much voltage, damage can occur to the components. Another trip condition is overload.