DS3800HSCG1C1C

About the DS3800HSCG1C1C

The GE High Level Isolator Board DS3800HSCG1C1C is designed for quick installation in the drive. The board features a modular connector on 1 end and retention levers on the other end. The GE High Level Isolator Board DS3800HSCG1C1C also is populated with 8 jumpers and 1 trimmer resistor. The board also is populated with 1 34-pin connector with retention levers and 1 programmable interrupt controller.

When you replace the GE High Level Isolator Board DS3800HSCG1C1C the replacement arrives in a shipping container. The best practice is to leave it packaged in the static protective sealed package. Close the lid on the shipping container and put it away in a safe location. Keep it from others who might mishandle it and cause damage.

When you are ready to install it, take it out of the shipping container. Use 2 hands and hold the board by the side edges. Be careful that you don’t bend or break any components that are near the sides when you pick it up. Slice open the bag and remove the board. If the board is a newer version, it might look different from the original board. The components might be in different locations and the components might look different.

Each new version includes the latest available improvements. This might include newer components that are a new shape or color. It might include circuit changes that result in placing components in a new location. However, the versions all perform the same in the drive.