About the DS3800HSDD
DS3800HSDD is a solenoid driver printed circuit card. DS3800HSDD was made for the Speedtronic Mark IV. This board was produced by General Electric. Mark IV is a series of controls for turbines. The Mark IV system and the previous Mark systems are reliable for the making sure that the turbine is running safely and efficiently. These systems have been responsible for controlling turbines for decades and are the result of years of development. The Mark IV Turbine Control System Series has a restricted set of possible functional applications in gas and steam turbine control and management systems alone, unfortunately not extending to the possible alternative energy-based wind turbine automated assemblies accepted to later-developed Mark Series iterations such as the Mark VI Turbine Control System Series of the same name. Additionally, this DS3800HSDD PCB product's greater Mark IV Series must be considered a now-obsolete legacy GE product series generally, as its manufacture was actually discontinued in one of the years past its original GE Series rollout due to a manufacturer-identified full-series functional obsolescence.
Hardware Tips and Specifications
On the right half of the DS3800HSDD board are eight silver transistors. A round red diode accompanies each transistor. A large connector port lines the left side of the DS3800HSDD and lets the user attach extra components that may be needed for operation. Next to a line of eight banded resistors are eight light-emitting diodes, otherwise known as LEDs. Yellow capacitors in various sizes are in the middle of the DS3800HSDD. Twenty-one various integrated circuits are on the left side of the DS3800HSDD. On the left half of the board are twenty-one (21) integrated circuits of different sizes. A number of different tiny components are located on each integrated circuit, such as resistors, diodes, and capacitors. Many resistors in different colors and banded patterns can be seen all around the DS3800HSDD. On the left side are two capacitors which are silver in color. Any rectifier, capacitor, or diode in this DS3800HSDD device's normal Mark IV Series assembly is part of a broader series-standardized voltage limitation strategy introduced to the Mark Series Suite. This DS3800HSDD device is more than likely the originally-developed product of its specific Mark IV Series functional role.
AX Control is committed to customer service and to providing high-quality products. All devices arrive in packaging which gets rid of all static energy accumulated during shipping. Technical support, if needed, should be provided by GE. Any of the previously-listed hardware components critical to the intended normative daily functionality of this DS3800HSDD printed circuit board product offering have been made available upon a visual inspection of the DS3800HSDD printed circuit board product itself, which was deemed as necessary given its greater Mark IV Series' legacy product series status and its concurrent online lack of viable originally-printed instructional manual materials. With this lack existing, the DS3800HSDD functional product number itself can be rolled out as a fine supplementary source of DS3800HSDD PCB hardware component and component specification information, as it codes for various relevant DS3800HSDD Board details through a series of consecutive functional naming elements. For instance, this DS3800HSDD functional product number begins with the dual-functional DS3800 series tag indirectly delegating this DS3800HSDD product's normal Mark IV Series assembly on top of its domestic original manufacture location. Some of the other relevant hardware specifications revealed through use of this DS3800HSDD product number include the DS3800HSDD Board's HSDD functional product abbreviation.
