DS3800HSDD1C1E

About the DS3800HSDD1C1E

DS3800HSDD1C1E is a printed circuit board. It was produced for the Speedtronic Mark IV series by General Electric. Mark IV is a series of turbine controls for both gas and steam turbines. The products in the Mark IV system ensure the safe and efficient operation of turbine systems. These Mark systems are the result of years of innovation and have been relied on to control turbine systems for many decades.

The DS3800HSDD1C1E board features eight (8) large silver transistors on the right half of the board. Located next to each transistor is a round red diode. Lining the left edge of the circuit board is a long connector port, allowing the user to connect any additional components that are necessary for operation. Eight (8) LEDs, or red light-emitting diodes, are on the right border next to a line of eight (8) striped resistors. Located in the center is a group of yellow capacitors in varying sizes. On the left half of the board are twenty-one (21) integrated circuits of different sizes. The integrated circuits are each made up of a number of different components, such as capacitors, resistors and diodes. Found all throughout the board are numerous resistors in different colors and striped patterns. Two silver capacitors are on the left side of the board.

AX Control ships all products in packaging that allows any static energy to be discharged before the item is opened. The manufacturer of the device, GE, should be consulted for any technical support or troubleshooting.