DS3800HXRB1C1B

About the DS3800HXRB1C1B

DS3800HXRB1C1B was made by General Electric. This card was created to be a part of the Speedtronic Mark IV Series. DS3800HXRB1C1B is a C bus receiver circuit board. The Mark systems have been relied upon to properly and safely control gas and steam turbines for the past 50 years. Mark IV is the beneficiary of several decades of development and improvement.

Covering the surface of the DS3800HXRB1C1B C bus receiver circuit board is a total of 30 integrated circuits. Also on the surface of the board is a wide array of capacitors in various sizes and colors. At the bottom left corner of the DS3800HXRB1C1B is a red switch. Three light-emitting diodes, or LEDs, are situated immediately to the right of the LEDs. Red lights are featured on the LEDs. The LEDs feature lights that are red when lit. Three male connector ports, which offer users the opportunity to connect additional parts to the card or to attach another board to the DS3800HXRB1C1B, are on the right edge of the board. On the right end of the card is a resistor network. Contained in every resistor network are several resistors. The total of the resistances of all the resistors inside combined is equal to the resistance of the network. Resistors which are striped and contain different colors of bands are found throughout the board. Each resistor's bands signify the resistor's maximum resistance. Also on the DS3800HXRB1C1B's surface are several jumper pins and blue jumpers that allow the pins to be connected.