DS3800NBIC

About the DS3800NBIC

The DS3800NBIC was created by General Electric. It was made to be part of the Mark IV Speedtronic turbine control series. The DS3800NBIC is a bridge interface circuit board. The DS3800NBIC was produced by GE (General Electric).

The DS3800HBIC has 26 integrated circuits that house many small electrical components such as diodes, capacitors, and resistors. There are 12 transistors on the board which are labeled with the reference designator Q, from Q4 to Q15. Also identified by the reference designator Q from Q1 to Q3 are three other transistors for a total of 15. One end of the DS3800NBIC has a connector port, enabling extra board or components to be added to the DS3800NBIC. Also on the DS3800NB1C is a variety of capacitors in different shapes and sizes. Featured on the DS3800NBIC are several resistance networks. A group of resistors is inside each resistance network. The total resistance of the resistance network is found by adding together the resistances of each individual resistor inside. The DS3800NBIC also has additional resistors which are not part of the resistance networks. On each resistor are bands of differing colors which symbolize the resistance values of each device. Also on the DS3800NBIC are diodes which are black and blue in color. The DS3800NBIC contains a series of jumper pins with blue jumpers. With these jumpers, two pins can be connected, making changes to the board. The DS3800NBIC has 24 test points lined up on one side. With these test points, the DS3800NBIC to be tested to make sure that there are no issues with the part. The DS3800NBIC also has a light-emitting diode, otherwise known as an LED.

If the DS3800NBIC needs any technical support, General Electric should be contacted.