DS3800NBIC1H1F

About the DS3800NBIC1H1F

DS3800NBIC1H1F is a bridge interface circuit board created for the Speedtronic Mark IV series of turbine control. The DS3800HBIC1H1F was produced by General Electric.

Located on the surface of the DS3800NBIC1H1F are 26 integrated circuits. Twelve transistors are labeled as Q4 through Q15 near the top of the board labeled Q4 to Q15 are 12 transistors. In other parts of the board for a total of 15 transistors are 3 more transistors labeled Q1 to Q3. On one edge of the DS3800NBIC1H1F is a connector which lets a user connect other devices or boards to the interface board. Also found on the board is a variety of blue, silver, and yellow capacitors. Seven resistance networks are located on the DS3800NBIC1H1F. Inside each of these resistance networks is a line of resistors. The total resistance of the resistance networks is equal to the sum of the individual resistors. Many other resistors are on the board apart from the resistance networks. These resistors have bands in different colors that represent the resistance capacity of the resistors. Black and blue diodes are also found on the DS3800HB1C1H1F. A group of jumper pins and blue jumpers are found on the DS3800NBIC1H1F. These jumpers can connect two pins together to make alterations to the board. On the right side of the board is a line of 24 test points which let a user test the DS3800NBIC1H1F to make sure that there are no problems. An orange LED, also known as a light-emitting diode, is also seen on the DS3800NBIC1H1F.

GE should be consulted about any technical support for the DS3800NBIC1H1F.